Skip to product information
1 of 6

Stud Finder Wall Scanner - 5 in 1 Stud Detector Detector Beam Finders Wall Detector Sensor Center Finding with LCD Display for Wood AC Wire Metal Studs Cable Joist Detection

Stud Finder Wall Scanner - 5 in 1 Stud Detector Detector Beam Finders Wall Detector Sensor Center Finding with LCD Display for Wood AC Wire Metal Studs Cable Joist Detection

Regular price Rs.3,499.00
Regular price Rs.4,999.00 Sale price Rs.3,499.00
Sale Sold out

 

Technical Details

  • The most accurate and higher safety - stud detector is specially designed! The most advanced sensor technology is used to accurately and quickly locate the metal pipes fire lines studs wooden frames steel bars and supporting beams hidden behind walls floors and ceilings Whether you are a professional homeowner or DIY enthusiast you can find a good use in this electronic screw scanner
  • The wall scanner includes five different scanning modes suitable for metal tubes fire lines studs wooden frames steel bars and brackets as well as ceilings deep embedded objects behind walls The bolt mode can detect wooden beams and joists in the dry wall up to 1 5 inches Metal mode can detect up to 3 inches of pipe Depth mode detects up to 3 inches of wood and metal components while 85 to 240 volts of AC current can be used for up to 2 inches of voltage and live wire
  • Auto-calibration and ergonomic grip comfortable to use before testing please hold down the scan button for 1-2 seconds Auto-calibration provides maximum reliability and accuracy for users The ergonomic design of this wall stud detector enables it to be fixed from any angle
  • LCD screen upgrade design display the required stud material and the exact position of the stud - Digital stud scanner with large LCD display and loud warning can detect the exact position of the object When the material is found the LCD display will beep to tell you if you are close to the target Fast detection saves time and energy for users and makes task completion easier
  • Graphic liquid crystal display multi-functional wall scanner detector has a graphic liquid crystal display which can display many prompts in detection such as detection mode signal strength automatic calibration battery indication and maximum readability When the battery power is insufficient it will display the indicator icon of insufficient battery power reminding you to replace the full battery in time New 9 Volt Battery

    Product Description

    Stud Finder Wall Scanner - 5 in 1 Stud Detector Detector Beam Finders Wall Detector Sensor Center

    The wall detector features large LCD display, ergonomic design, and multi-sense technology for accurate detection of both metal and wooden studs. It will also detect live wiring up to two inches into walls. The four scanning modes (stud scan, deep scan, metal scan, and AC scan) make it ideal for both tradesmen and home carpenters. With this device, you can immediately find a suitable place on the wall without making any extra holes

    Stud Finder Wall Scanner - 5 in 1 Stud Detector Detector Beam Finders Wall Detector Sensor Center

    Stud Finders is a device that is used to determine exact location of framing studs that are located behind the drywall. This Multi-scanner stud finder uses electronic signals to quickly locate edges and center of metal, studs, joists, pipes, live AC wire behind walls, floors and ceilings.

    The cost of a stud finder wall scanner will almost always be less than the cost of repairing the damage done from not locating one before hanging something. TAKE IT HOME AND START YOUR PROJECT SAFE!

    Note: 1. This stud finder can quickly locate metal, studs, joists, pipes, live AC wire behind all kinds of walls floors, and ceilings but except the cement board wall and brick wall, you can use it on popcorn ceilings, plaster walls, textured surfaces, drywall, etc.

    Stud Finder Wall Scanner - 5 in 1 Stud Detector Detector Beam Finders Wall Detector Sensor Center

    Stud Finder Wall Scanner - 5 in 1 Stud Detector Detector Beam Finders Wall Detector Sensor Center

    Stud Finder Wall Scanner - 5 in 1 Stud Detector Detector Beam Finders Wall Detector Sensor Center

    Stud Mode

    This stud mode has three depth stud scanning chooses. The deepest scan mode scans up to a maximum depth of 1.5 inches (38 mm).

    Deep Scan mode is a sensitive scanning mode that should be used when there are additional layers for wall panels and panels. To minimize false alarms or other objects behind the wall that may not be studs. Always start scanning at a resolution of 0.5 inches(12.7 mm).

    Second 1 inch(25.4 mm). The last use of 1.5 inches(38 mm) scanning mode.

    Metal Scan Detection

    Wall detector can locate metal studs in Stud Scan mode, Deep Scan mode, and Metal Scan Modes. Since stud finders are looking for a change in density behind drywall, not a particular material, in Stud Scan and Deep Scan Modes the detector will react to metal studs the same as it would for wooden studs.

    After you detect the center of an object. Please Use Metal Scan Mode to determine if the previous reading in the Stud scan was a wood stud, metal stud, or pipe.

    Wire Warning Detection

    Wire Warning detection indicates the presence of live, unshielded electrical wiring up to 2 inches (51 mm) deep. For Safety, in all modes, this wall scanner always detects and indicates the Live AC Wire

    Note: Wire Warning Detection works in both Stud Scan / Deep Scan / Metal Scan

    Modes. The Wire Warning Detection Icon will flash when live, unshielded wires are detected.


    Stud Finder Wall Scanner - 5 in 1 Stud Detector Detector Beam Finders Wall Detector Sensor Center

    Stud Finder Wall Scanner - 5 in 1 Stud Detector Detector Beam Finders Wall Detector Sensor Center

    Stud Finder Wall Scanner - 5 in 1 Stud Detector Detector Beam Finders Wall Detector Sensor Center

    Step 1: Calibration

    Important notice: Calibrate before scanning

    Please insert a 9V Battery (included).

    Press Power Button to turn on the device.

    Put it on the wall where you want to detect and choose the Scan Mode, then press the scan button to start calibration. The decreasing bars will disappear and the buzzer will beep one time and the calibration is completed.

    Step 2: Moving

    Then move the stud finder along the wall slowly.

    If shake or lift the stud finder by accident, the device needs to re-calibrate.

    The bar on the screen raises with the beep signal alter, which means the device is close to the AC wire.

    Step 3: Find the AC Wire

    When the signal bar is full and the beep alarm is loudest, it means you have found the AC wire. Mark it with your pencil.


View full details

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)