For Nintendo Switch Pro Controller Super Smash Bros Ultimate Edition Gamepad NEW

Description:

Operating instructions for switch Bluetooth handle:

1. Host settings

#1. To connect the Bluetooth handle, the controller connection (Bluetooth) option of the host is on, or turn off flight mode;

#2. Select controllers - > change grip / order on the main page to put the host in the status of searching for Bluetooth devices（ Loopback (not required)

#3 note: if the host is difficult to pair the handle, it may be that too many Bluetooth devices are connected to the host, and the Bluetooth information needs to be cleared manually (system setting - > controllers and sensors - > disconnect controllers);

2. Handle pairing host

When the handle is turned off, press and hold the small button next to type USB for 3 seconds to enter the code matching state. The four LEDs are in the state of fast water flow lamp, and the corresponding channel indicator is always on after successful connection. If the synchronization is not successful within 1 minute, it will sleep automatically.

If the Bluetooth connection is successful, the indicator LED of the corresponding channel is always on (assigned by the switch host)

3. Handle back to host

When the handle is turned off, press any key to wake up the handle. After being woken up, it will automatically connect with the paired host back. If the back connection fails for 6 seconds, it will automatically sleep

After the handle is connected successfully, if the handle does not operate, it will enter the sleep state according to the sleep setting of the host system, the host screen will be closed, and the handle will sleep automatically

4. Low voltage alarm

If the lithium battery voltage is lower than 3.55v ± 0.1V, the current channel lamp flash indicates that the voltage is low;

If the lithium battery voltage is lower than 3.45v ± 0.1V, it will sleep automatically;

5. Handle test

Key test: system setting - > controllers and sensors - > test input devices

3D test: system setting - > controllers and sensors - > calibrate control sticks

6. Reset test

Press the small button next to type USB to close the handle;

7. Use distance

Barrier free operation is about 8-10m.

The package includes:

1 * switch controller

1 * 1.2m charging line

1 * instructions