| Color | RGB (Red, Green, Blue) |
|---|---|
| Brand | RGBZONE |
| Indoor/Outdoor Usage | Indoor |
| Light Source Type | LED |
| Power Source | battery-powered, Battery Powered |
| Light Color | RGB |
| Style | Modern |
| Material | Plastic |
| Controller Type | Remote Control |
| Number of Light Sources | 150 |
| Voltage | 24 Volts |
| Wattage | 144 watts |
| Control Method | Remote |
| Number of Batteries | 1 CR2 batteries required. |
| Manufacturer | RGBZONE |
| Part Number | TE156 |
| Item Weight | 0.798 ounces |
| Package Dimensions | 5 x 3.5 x 0.4 inches |
| Item model number | 4334417644 |
| Batteries | 1 CR2 batteries required. |
| Is Discontinued By Manufacturer | No |
| Maximum Compatible Wattage | 144 Watts |
| Specific Uses | Indoor use only |
| Batteries Included? | No |
| Batteries Required? | No |
About this item
- ▶Multi-Functions LED IR Controller: There are 16 colors and 4 light pattern: Flash/Strobe/Fade-change/RGB Smooth-change. Easy for you to turn ON/OFF strip lights, DIY colors as you like and adjust brightness.
- ▶Compatible with RGB Strip: Work with SMD 5050 3528 2835 RGB led light strips with 4-Pin connectors. (Not for RGBW strips which has 5-pin connectors.)
- ▶Safe to Use--Low voltage: Output current: (3x2A)6A, Input voltage: DC 5-24V. The remote controller has been low voltage, low heat, no radiation, it is safe and touchable.
- ▶IR Remote Controller: IR remotes have a performance range of about 30 feet, point to the sensor indicator light when you use Please note: IR remotes must be pointed directly at the devices you are trying to control.
-
▶Easy to Use: If you want a straight-forward, simple to use, cost-effective remote, our this 24 keys IR remote controller dimmer is the way to go. Package included: 1 x IR Controller 1 x 24 Key IR Remote Controller.(CR2025 is included in the remote control. Pull out the plastic piece before use.) Tips: Input voltage = Output voltage.
Product Description
Multi-Functions: 20 static colors, 6 DIY modes, adjust brightness, turn On/Off, control modes: Flash, Strobe, Fade, RGB Smooth-change, Static, DIY frequently-used modes as you like.
Description of the interface：
- Connect to DC Power Supply: 5-24V, Input voltage = Output voltage.
- Infrared Signal Receiver: Point to the sensor indicator light when you use, there should be no obstacles between the light strip and the controller.
- Connect to LED Strip: Compatible with all 5050 2835 3528 RGB light strip, no matter what brand it's.
- Power supply according to your led lights. For example, DC5V 5050 LED Strips must use DC5V power supply. ***Input voltage=output voltage.
- The power is 5V<30W, 12V<72W, 24V<144W, if it exceeds this power, please equip the light strip with a separate power supply or use it with an amplifier.
Setting of wiring and sortingWrong wiring sorting can result in opposite colors, e,g,red becomes green.
Methodological steps:
- Turn off the switch, press the "FADE7" key, the light strip blinks.
- Press the RGB three keys again to adjust to the color you want.
If the change is successful, the light bar will blink once.
